The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 

01206 736168 | International: +44 1206 736168

Acrylic Display Cases

Our Display Case Styles

Traditional Wooden Base Display Case

These are available in eighteen different base colour combinations, the wooden trim around the outside can be supplied in Black, Mahogany or Light Oak colour wood, the interior flat display area is covered in a soft quality baize material which can be supplied in six colours, black, blue, red, cream, green and moss green. The wooden frame around the outside of the base is approx. 5mm higher than the interior display area, and it is within this that the display cover sits, so the lip will help stop the cover being knocked off of the base. The underside of the base is covered in a non slip baize to stop the base from sliding across the surface.

Modern Display Case with a Choice of Three Base Colours

The range of modern acrylic display cases has a choice of three different colour bases to choose from, they are black, blear and the newly released white. Both the black and the white have a high gloss finish which reflects the image of the displayed item in them. The base is cleverly designed to hold the clear display cover in place easily. The lower part of the base is slightly larger than the cover so the cover sits upon this part of the base, we then have four quality machined stainless steel corner supports, which hold the upper base 17mm higher than the lower base, the upper base is slightly smaller than the inside of the display cover, so the cover sits over this and so cannot be pushed off the base. The corner supports are in each corner.
PLEASE NOTE: with this design of base you need to allow for the corner supports, they protrude about 5mm through the acrylic base, and are about 15mm in from each side and corner.
Also on the stock size display cases the covers are the same size as the other display case styles, so the usable interior height is about 20mm shorter. If you are buying a custom sized display case with a modern base there is no need to allow for the base, just enter your sizes as the required internal height, we will make the display case to match the internal dimensions chosen by you.

Acrylic Display Case with a Flat Acrylic Base

The simplest of our designs, this style consists of a clear display cover and a single layer acrylic base, which can be made in a choice of colours, from black, white or clear. The base is made from 5mm thick acrylic and has a rebate machined around the outside to form a lip which will locate the display case. These are supplied with four loose self adhesive rubber feet which can be stuck on by you. This allows you to use these as a display case, with the base on the bottom, or as a display case with a removable lid (like a container).

Display Cover Only

All of our display cases can be supplied without a base, just find the size you want from the stock sizes, they can also be made to your size from our custom display case section.

Acrylic Wall Display Cases

The wall display cases we make come in four different styles, all are supplied with our custom designed stainless steel wall fixings which hide the screw heads to leave a very professional and neat method of fixing to the wall.

  • We make range of wall mounted sports memorabilia wall showcases, these are designed to hold footballs, rugby balls, boxing gloves and Olympic torches. These have stands or brackets fitted into the design to hold and support the displayed item. The stand/support is fixed onto the back panel so the cover is separate and can be removed without disturbing the displayed memorabilia. The cover has hooks down each side of it that slot into the slots on the back panel, this creates a nice secure fit, yet is easy to remove when needed. As with all of our wall display cases, they are supplied with the necessary wall fixings to fit them to your wall. This style is not generally available to be custom made due to the cost, but can be custom made if necessary.
  • Our shelved wall display cases are available in several sizes, each with a various number of shelves, designed primarily for models, but can be used for a wide variety of collectables or products. The models they have been designed for are 1:43 scale model cars, 1:12th scale model motorbikes, 1:76 scale model buses, 1:50 scale model trucks also 1:18 scale model cars. The shelves are fixed to the back panel so that the cover can be easily removed without disturbing your collection. The cover has hooks incorporated into its design that slot into the slots in the back panel, to provide a secure fit, but remain easy to remove when needed. They come complete with the wall fixings.

If you need more information then please contact us. We'll get back to you as soon as possible!